How to measure

4 simple steps

Measure

Simply Measure the windows you want shutters in. Our measuring guide makes this easy.

Record the measurements

Write down the sizes, in millimetres (mm).

Get your price

Just enter the measurements in our calculator, this will generate the price. We will do the rest.

Accept the estimate

Once you accept the estimate, we will contact you and take care of the rest.

GET YOUR PRICE FAQ

How to measure – Reveal or Face Fit?

Before you can measure for your estimate you need to figure out where the shutter is going to fit. If you can fit it within the reveal this is always the first choice. The reveal is the step back between the face of the wall in a room and the window. You will need a minimum of 65mm to fit within the reveal. When looking for the 65mm measurement you will need to watchout for protrusions / obstructions such as handles, locks keys, parts of the window frame, anything that sits forward of the glass. Be especially aware of sliding windows as the handles slide across the window.

In the example pic to the left you can see the reveal measures over 90mm.

Don’t forget, we are going to conduct a final measure and we guarantee your shutters will fit. You are simply creating an estimate.

if it is a case of a key or lock then simply add a frame cut-out, if it is not needed then we will remove it the order and amend the final quote.

Follow these steps to ensure an accurate price for your new shutters:

The picture shows a window with a deep enough reveal fir a reveal fit, you are looking for a minimum of 65mm reveal to fit the shutters inside the reveal.

What is a reveal? A window reveal refers to the interior space surrounding a window frame. It includes the vertical and horizontal surfaces that form the recess in which the window is set. The reveal can be thought of as the area between the window frame and the wall, often visible from inside the room.

Bifold and Sliding must only be measured as Face Fit.

Any questions on how to measure and our team are only too happy to help, feel free to call. We may ask you to send a photo for clarity.

How to measure Reveal Fit

Yes, have have at least 65mm of depth within the reveal.

  1. Millimetres: All measurements need to be in millimetres (mm).
  2. Record you measurement: make sure to write down as description or identifier for the window, eg Master Bed Left.
  3. Check Depth of Reveal Clearance: the reveal should be a minimum of 65mm. This allow enough space for the blades to operate beyond the back of the panel.
  4. Measure Width: Measure the inside width of the reveal from left to right.
  5. Measure Height: Measure the inside height of the reveal from top to bottom.
How to measure Face Fit on Architrave

No I do not have 65mm of depth within the reveal. Yes, I have an architrave. The frame for the shutters will be fitted to the face of architrave.

  1. Millimetres: All measurements need to be in millimetres (mm).
  2. Record you measurement: make sure to write down as description or identifier for the window, eg Master Bed Left.
  3. Measure Width: Measure from the outside left edge of the left architrave to the outside right edge of the right architrave.
  4. Measure Height: Measure from the outside bottom edge of the bottom architrave to the outside top edge of the top architrave.
How to measure Face Fit on Square Set

No I do not have 65mm of depth within the reveal. No, I do not have an architrave. The frame for the shutters will be fitted to the to the face of the wall.

  1. Millimetres: All measurements need to be in millimetres (mm).
  2. Record you measurement: make sure to write down as description or identifier for the window, eg Master Bed Left.
  3. Measure Width: Measure the inside width of the reveal from left to right, then add 100mm to this width.
  4. Measure Height: Measure the inside height of the reveal from top to bottom, then add 100mm to this width.

How to measure – Measuring sliding or bifold must only done as a Face Fit. 

Window Locks & Frame Cutouts

We are often asked about window locks, their keys and even handles. Sometimes a frame cut-out is required so that a handle can turn, a window lock can operate or key can be removed . Frame cut-outs can be on the left, right, top or bottom frames most commonly but they can be applied to any piece of frame as required. The pictures below show a frame cut-out that allows the removal of a key, in most cases it is good to allow a little more space than you think. Frame cut-outs can be different sizes and in different locations to suit the purpose.

In this case the back of the frame has been removed to allow key access to the window lock.

As you can see the key can still easily be fitted into this window lock, the cut-out also provides more room to operate the key and lock. 

GET YOUR PRICE FAQ

Frequently Asked Questions

Have other questions?

Our friendly team is ready to help please call us 1800 274 888. Reach out to us today for more information or assistance. Cheap Shutters Australia: Quality You Can Trust, Prices You’ll Love!

Do you service the whole of Sydney?

Not at the moment, our service area is – Sydney’s Northern Beaches, Mosman, Lower North Shore, Upper North Shore, and the Hills District to McGraths Hill. Cheap Shutters are your trusted experts when it comes to great quality affordable planation shutters.

Why is your pricing so good?

We have negotiated great rates with our supplier, we have streamlined operation which means you pay less.

What if my measurements are not correct?

That is exactly why we do a final measure and confirm your estimate. No worries if its not quite right, we will correct any issues including pricing.

I am not confident in my measurement does it mean my shutters will not fit?

Not at all, both the measurement and the installation is our job, we will guarantee the shutters will fit.

What does my final price include?

Once we have conducted the final measure and made all corrections the final price includes Your Shutters, GST, Delivery & Installation.

How long does it take before I get my shutters?

Our usual delivery is from 6-8 weeks as a rule of thumb (Should you order SupaTilt then add 2 weeks. Should you order frame cut-outs then add 1-2 weeks). Occasionally there is a shipping delay or delays for national or public holidays but we will notify you of these delays.

When Do I Pay and how much?

You pay a 10% deposit, 40% at the time you accept the formal quote, the final 50% when your job is booked for installation.

What happens if I do not go ahead prior to my order being confirmed and placed with the manufacturer?

Should we conduct the final measure, your deposit will be refunded less $40, if we have not conducted the final measure and you cancel the final measure with a notice period of 1 business day or more then your entire deposit will be refunded. The $40 is to cover costs associated with getting to your home (vehicle, fuel & tolls etc) .

What if I am having issues with how to measure?

Our friendly team is ready to help please call us 1800 274 888.

Where can I find the product warranty?

With the Manufacturer Downloads

get your price

Price your shutters here.

GET YOUR PRICE FAQ